More Compact, Integrated, Smart and Wider application
■ Powerful/ Anti-noise model
NX feed system is a delivery system using a kind of piston
pump operated by air pressure to apply various viscosity
glues for the production. It gives more comfortable work
environment at the manufacturing site.
■ Max. Life lower pump It helps to save the wasted times in maintenance. Beside,
it accepts to apply for the high viscosity glue or
a glues having a gap fillers feeding.
■ Integrated module
All functions in 1 unit.
Pressure feeding, pressure regulating, pressure line shut-off,
filtering, counting, auto pumping stop and non-stop glue
feeding by auto-changing.
■ Prevention of the air getting into lower pump
The pumping will be automatically stopped, when the glue
empty at the lowest position.
■ The MAX. Efficiency and the reasonable system cost
Don't waste your valuable time anymore during the new
pail replacing and reset when the glues pail empty.
All NX Smart series pumps will work according to your
order can go to the non-stop feeding or single mode.
It's selectable in the two mode.
■ Small area system in the production line
NX feed system doesn't have an additional control unit.
It's the auto-changing system operated by itself. Consider
this compact system size in your production line design.
■ High performance double acting pump
Apply for all dispensing works. line bead, potting, metering,
spreading, mixing and shooting.
Technical Data
NX Smart Series Feed Unit
Model | C2/S2 | C3/S3 | C6/S6 | C7/S7 |
Max. air inlet pressure(MPa/psi) | 0.7/100 |
Pressure ratio | 30:1 | 12:1 | 12:1 | 60:1 |
Flow rate(cc/cycle) | 5 | 1 | 10 |
Acceptable viscosity(cps) | 1,000,000 | 600,000 | 300,000 | 2,000,000 |
Acceptable density(g/cc) | 1~4 |
Glue outlet port size | PT(f)1/2" | PT(f)1" |
Wetted parts :
Max Life Lower Model : Stainless steel, Carbon steel, PTFE, UHMWPE.
Stainless steel Lower Model : Stainless steel, PTFE, UHMWPE.
Component Indentification (C2B111)
Key :
A
R5037P Installed and control integrated
B
Valve : Ram post direction up and down
C
Pressure gauge(ram)
D
Push button : Pail out
E
Air vent valve
F
Platen
G
Stainless steel inline filter installed
H
Lamp Signal(empty/working/ready)
I
Push button : Start/ Reset
J
Mode selector(single feed/ automatic non-stop feed)
K
Pressure gauge(pump)
L
Silencers
M
Valve : Pumping on/off
N
NXP series lower pump
O
Position guide(pail)
P
Air pressure regulator(ram)
Q
Air pressure regulator(pump)
R
Air inlet connector
S
Limit valve(glue empty signal)